Emerson Daniel 3410 Series Maintenance And Troubleshooting Manual page 41

Maintenance and Troubleshooting manual
DAN-20057317
CONTENTS MAY BE HAZARDOUS
The meter must be fully depressurized and drained before attempting to remove the
transducer holder of T-Slot transducer assembly, or the T-200 transducer assembly. If
gas or fluid begins to leak from the transducer holder of T-Slot transducer assembly, or
T-200 transducer stalk assembly, stop immediately and reinstall the transducer holder
or T-200 stalk assembly.
Failure to comply could cause serious injury or equipment damage.
A. Transducer holder
ESCAPING GASES OR FLUIDS HAZARD
The purchaser of the meter is responsible for the selection of Daniel components/seals
and materials compatible with the chemical properties of gas flow measurement.
Failure to select the suitable meter component/seals may cause escaping gases or
liquids, resulting in injury or equipment damage.
Model 3418 GUSM
WARNING
CAUTION
Meter repairs
August 2021
41