Cabletron Systems CyberSWITCH CSX5500 Quick Start Manual page 40

QUICK START
Setting up a New Number
1. Click Start, Programs, Accessories and then Dial-Up Networking. (Or, you may get to the same
location by clicking My Computer, then double clicking on Dial-Up Networking).
2. Double click on Make New Connection:
a. Provide name of the computer you are dialing.
b. Select modem type.
3. Click Configure. Three tabs will be displayed:
a. On the General tab:
• Select COM port to which your modem is hooked up.
• Select modem's maximum speed.
b. On the Connection tab:
• Under Connection Preferences, set the following: Data Bits, 8; Parity, none; Stop Bits, 1.
Port Settings and Advanced may remain at default values.
• Call Preferences may remain at default values.
c. Options tab may remain at default values.
4. Click OK to accept these values and return you to the modem name/type screen. Click Next.
5. Enter 313 as the Area Code, 55511111 as the Phone Number and select United States Of America
as the Country Code. Click Next.
6. Confirm your choices. Click Finish to proceed, or Cancel to abort the new number shortcut.
Setting Up Server Type
1. After setting up a new number, a new dialing icon will be displayed under Dial-Up Networking.
(It will have the name you've assigned the new connection). Select this item, click File, and then
Properties.
2. Click Server Type. Pick the options you want, and identify which protocols your network
allows.
3. Click TCP/IP Settings. Click Specify an IP Address and provide the IP address of your machine.
Click OK when finished.
Dialing Out
1. Double click on your new dialing icon to bring up the Connect To screen.
2. Enter your user name and password. You may change options by clicking the box labelled
Dialing Properties, but this isn't necessary.
3. Double click on Connect. This should place the call.
4. Once the call is connected, click Details to view the type of protocols in use. Click Disconnect to
disconnect the call.
40 CyberSWITCH