Bts Network Services; Send Mf Digits (Tones); Forward Recall; Soft Key Option - BT Revelation Owner's Handbook Manual

BTs Network Services

BT Revelation is compatible with all BT
Network Services that require tones to be
sent to line, home banking, voice message
systems and the numerous services now
available via the telephone.
All these services rely on tones being sent
from your telephone to choose the options
available.
To use these BT Network Services with an
ordinary tone telephone, you just dial the
appropriate number(s) on your telephone.
However, if you wish to use the BT
Revelation Systemphone for these services,
you need to switch the tone on using the
Send MF Digits feature as explained on this
page. Once switched on the feature remains
active for 20 minutes unless you turn it off by
pressing the hold key.
If you require
more
Services, please call FREE
Send MF digiJs (tones)
This feature enables you to send extra MF
digits to line. You will need this if you are
using BT Network Services, home banking
services and so on. The feature is only
available on a Systemphone.
If you wish, you can program this code followed
by up to 28 digits onto a key.
inserted by pressing the pre-programmed
PAUSE key.
You may use this feature by pressing the pre­
programmed MF TONES key, which avoids
the need to dial the code.
26
details about BT' s Network
154.
on
Send Tone 59
A pause may be
•Press the MF TONES key or dial the code
(59)
•Dial the appropriate numbers
•To cancel, press HOLD.

Forward recall

This feature is required if you are using BT
Network Services, or if your BT Revelation is
connected to another telephone system
(PABX).
The Forward Recall feature allows you to
send a hold siwial forward on the exchange
line.
•To send a hold signal, you must be on a call, or
have dialled at least one digit of the number
you are calling.
•For Systemphones, press the pre-programmed
FORWARD RECALL key or dial the code
•For ordinary telephones, the code is RSO.

Soft key option

If the exchange lines are programmed for
Loop Disconnect (LD) or pulse dialling, you
can switch the line signalling to Multi­
Frequency (MF) or tone dialling for the
duration of the dialling phase of a call. This
feature is only available on a Systemphone.
•Obtain a free line.
•Dial * or # before you dial the number.
Recall 50
(50).