Do Not Disturb; Alarm Call - BT Revelation Owner's Handbook Manual

Other featuers
Automatic Night Seroice
This feature allows you to set the times at
which the system automatically enters night
service and reverts to day service.
To set the start time for night service
• From the programming position, dial
followed by the system PIN. The
Systemphone shows Di al admi n code.
•Dial the admin code
shows the code followed by the time
on resetting the system).
• Enter the required start-up time in 24-hour
format (for example, for
• Press # to save the time.
• Press HANDS FREE to finish programming.
To set the start time for day service
• From the programming position, dial
followed by the system PIN. The
Systemphone shows Di al admi n code.
•Dial the admin code
shows the code followed by the time
on resetting the system).
•Enter the required start-up time in 24-hour
format (for example, for
•Press# to save the time.
• Press HANDS FREE to finish programming.
Manual night service
This feature enables you to turn night service
on or off manually. When you turn night
service on, the night service ringing and
Class of Service come into operation.
(78)
•Dial the code

Do not disturb

If your phone is set to Do Not Disturb,
anyone trying to call you will receive busy
tone. If the person trying to contact you has a
Systemphone, Do not Disturb will appear on
its display.
Call Back is the only incoming ringing that
will be accepted when this feature is set.
• Press the pre-programmed DND key or dial
(42).
the code
20
.
70
(*1).
The Systemphone
(00:00
5:00 1700).
pm enter
70
(*2).
The Systemphone
(00:00
9:00 0900).
am enter
SET/CLR Night 78
20
from extension only.
Don't Disturb 42

Alarm call

This feature enables you to set your phone to
ring at a given time.
(75)
• Dial the code followed by the time in a
24 hour format. For example, enter
0730.
as
At the programmed time the phone will give ten
rings. If not answered it will ring twice more at
two-minute interoals and will then cancel. The
phone will not ring if Do Not Disturb is set.
Alarm calls must be set daily.
• After you have set an alarm call you may
check the time set by dialling
*
• Dial to delete the time. Going on hook will
not affect the set time and the alarm call will
be activated at that time.
NOTE: The ability to review and delete the
time may not be available on your system. If
this is the case, when an alarm call is set,
75
dialling automatically cancels the alarm
call.
Alarm call 75
7 .30
am
75.