Other Features; Reset Phone; Diverting Calls - BT Revelation Owner's Handbook Manual

0 the r fea tur es
about what

Reset phone

You can reset your phone to cancel all the
following features if they have been set: Do
Not Disturb, Divert, Call Back, Messaging,
Alarm Call.
•Dial the code
(79).
• If you are using a Systemphone, wait until it
goes on-hook automatically.
• If you are using an ordinary telephone, wait
for the acknowledgement tone (internal dial
tone).

Diverting calls

Special dial tone will be heard at your extension
until call diversion cancelled. You cannot divert
is
to an extension that has Do Not Disturb set.
Divert to
Before you leave your extension, you can
divert all your calls to ring at another
extension.
• Press the pre-programmed DIVERT TO key or
dial the code (48), followed by the extension.
Divert from
After you have left your extension, you can
divert your calls to follow you and ring at
another extension.
• After you have left your extension, dial the
code (49), followed by your own extension.
• To cancel this feature from your own
extension, use code
48.
Divert on busy
You can divert your calls to ring at another
extension if your extension is busy (engaged).
• Dial the code ( 4 7) froin your own extension,
followed by the extension where your calls
Read these pages to find out more
Divert on no answer
Reset Phone 79
•Dial the code
• From the programming position, dial 70
Divert to 48
• Dial the admin code:
• Enter the extension number.
• T he Systemphone shows the admin code,.
Divert from 49
•T he lights in the Busy Lamp Field (see page
• To set or change the diversion, enter the
• To cancel a diversion, re-enter the second
Divert Busy 47
• Press # then HANDS FREE.
are to be diverted.
You can divert your calls to ring at another
extension if there is no answer at your
extension after four rings.
from your own extension,
(46)
followed by the number of the extension
where your calls are to be diverted.
Programming, examining and cancelling call
diversion from the programming position.
From the programming position you may
examine an extension to see if any of the call
diversion options have been programmed.
You may also set or cancel them. In default no
diversions are programmed.
set, verify or cancel diversion options
To
followed by the system PIN. T he
System phone shows Di al admi n code.
- 90 for Divert To/Divert From
for Divert on Busy
- 91
- 92 for Divert on No Answer.
then the extension number that you are
examining. If a diversion is already in place, it
shows the extension that has been diverted
from then the extension that has been
diverted to.
37) indicate where calls are diverted to.
extension to which calls are to be diverted.
displayed extension number.
Divert no Ans 46
17