Administration Programming Codes - BT Revelation Owner's Handbook Manual

Administration programming

Administration programming codes

Feature
Advisory messages - change pre-programmed text
Access {PIN) code
Call logging information - enable/disable
Call waiting tone
CDS: Associating names and extensions with CDS
numbers
CLIR Programming {ISDN)
COLR Programming {ISDN)
3.1 Khz ISDN calls {ISDN)
Divert to/from - set/verify/cancel
Divert on busy - set/verify/cancel
Divert on no answer - set/verify/cancel
Extensions access to outgoing lines
Extension Class of service - day service
Extension Class of service - night service
Extension names
Incoming ringing telephones day service
Incoming ringing telephones night service
Manager/Secretary Programming
Night service - automatic day service time
Night service - automatic night service time
On Hold Options - Music/Tone/Silence on Hold
Recording a personalised greeting
Replaying a personalised greeting
Systemphones which may not be paged
System-wide Class 5 restriction - enable/disable
Time and date
Voice Module: Lines on which Voice Module is
activated by dialling 35*
Voice Module: Ring Time before Voice Module
activation
1These features may not be available in earlier systems
38
Admin code Default setting
*4 1 Phone
2 Return at
3 Return by
4 Call Back at
5 At a Meeting
0 111
99 Disabled
No extensions receive call waiting
95
tone
* 81 None
30 No extensions programmed
31 No extensions programmed
No extensions programmed
32
No diversion
90
91 No diversion
No diversion
92
8 All
6 1
7 1
*3 Extension numbers
Extensions 20 - 25 and Central Bell
1
Extensions 20 - 25 and Central Bell
2
9 7 1
None
*2 No time programmed
*1 No time programmed
981 1 +6 Tone on Hold
2+6, 3+9, 4+ 12 Music on Hold
*5 No message recorded
*6 No message recorded
*9 All Systemphones may be paged
*O Disabled
4 00:00
94 1
All lines except fax detect lines
93 1
05 seconds
6At Lunch
7 At Home
8Call
9 Holiday
01-01-95