Call Features; Redial; Call Pick-Up; Conference - BT Revelation Owner's Handbook Manual

Call features

Redial

Use this feature to redial the external number
you most recently dialled.
automatically.
• Press the pre-programmed
dial the code (60).
Phone pick-up
Phone pick-up
You can pick up any call (internal or external)
which is ringing at another extension, if you
know the extension number.
•Dial the code (43) and the ringing extension
number. The display shows
where XX is the extension number.
Incoming pick-up
call
You can pick up an external call which is
ringing on a Central Bell or at another
extension. This feature will not work for
internal calls.
• Press the pre-programmed
dial the code (66) or (8)1•

Conference

This feature allows you to hold a three way
conversation between three extensions, or
two extensions and an exchange line.
• Place the first extension (or external call) on
hold.
• Dial the second extension.
• On a Systemphone, press the pre-programmed
key or dial the code (3).
CONFERENCE
• On an ordinary telephone, the code is R3.
1
This feature code is used in earlier software
releases of BT Revelation
Redial 60
A line is seized
REDIAL key or
Phone Pick Up 43
Phone Pi ck Up XX
Ca 11 Pi ck Up 66 (or 8)
1
PICK UP key or
Conference 3

Call back

If you call a busy extension, use Call Back so
that the extension rings you once it becomes
free.
The Systemphone display shows the number
or the name of the extension calling you back.
If you dial for an exchange line and no lines
are free, use Call Back to receive an
exchange line as soon as one is available. The
Systemphone will show
cannot use Call Back if you have selected a
specific line.
• On a Systemphone, press the pre-programmed
key or dial the code (44).
CALL BACK
• On an ordinary telephone, the code is R44.

Camp on busy

If you get busy tone (engaged tone) when you
call an extension, stay off hook and when the
called extension becomes free your extension
will call the phone.
• If you get busy tone when you call an
extension, stay off hook. There
dial.
Pam
The Park feature allows you to put an
external call on special hold by 'parking' it in
the system. You may then pick up the call at
any extension.
Only one call may be parked in the system.
A parked call will recall after three minutes.
• On a Systemphone, dial the code (57) to park
or retrieve a call.
• On an ordinary telephone, the code is R57 to
park a call, and 57 to retrieve it.
Call Back 44
Line Ca 11 Back. You
is no code to

Park 57

15