Paging; Extension Lock - BT Revelation Owner's Handbook Manual

Pagi,ng
PA system
If there is a PA connected to your BT Revelation,
any extension can make an a,nnouncement over
the system by dialling the number of the
extension where the PA is connected.
• Dial the paging extension number and make
your announcement (maximum of 15 seconds).
There is no code for this feature.
• Do not hang up if you want the PA Answer
feature to be available.
PA answer
If you have been paged over the PA, this
feature puts you in direct contact with the
paging extension, provided that the person
who paged you has not replaced the handset.
•When you are paged, dial the code
the nearest phone and you are connected to
the paging extension.
Internal page (all Systemphones)
Any extension can make an announcement to
all Systemphones by using the Internal
Paging feature. Systemphones which are page­
protected will not be paged.
• Dial the code
(34).
• Make your announcement.
Internal page (one Systemphone)
(Voice Call)
This feature allows you to page an individual
System phone.
• Dial the code
(33).
• Dial the number of the extension you wish to
page.
• Make your announcement.
Internal page answer
• To answer a page, press the MUTE key and
speak either handsfree or via the handset.
Caution
If you use this method to answer an internal
page to all Systemphones, your conversation
will be heard by all other Systemphone users.
• From the programming position, dial
• Dial the adrnin code
•Enter the extension(s) to be page-protected.
Paging Answer 74
• Press HANDS FREE to finish programming.
from
(74)
• Dial the code
Page 34
• Dial the existing lock code (preset as
• Dial your new three-digit lock code.
•Dial the code
• Dial your lock code.
•Dial 9, press a line key or dial the code for a
• Dial your lock code.
Page-protection on Systemphones
In default all Systemphones may be paged
when an extension dials
announcement. You can page-protect a
Systemphone to prevent it from being paged.
This will not prevent voice calls.
prevent voice calls, use the Do Not Disturb
feature described on the opposite page.
followed by the system PIN. The
Systemphone shows Di al admi n code.
(*9).

Extension lock

You can lock your extension to prevent
unauthorised users from making external calls.
Changing your extension lock code
(40).
Caution
If the code is lost or forgotten, you should
contact BT.
Locking and unlocking your extension
(41).
Making a call with the lock set
line as if to select a line.
( 51-54)
• A line will be seized.
• Dial the number you require.
features
Other
and makes an
34
If
you wish to
70
Lock program 40
111 ).
Extn Lock 41
Dial lock code
21