Administration Programming; Basic Programming Procedure; Busy Lamp Field; Changing The Access Code (Pin) - BT Revelation Owner's Handbook Manual

Administration programming

Basic programming procedure

Programming is initially done from extension
20 using a Systemphone.
Programming is carried out as follows:
• Enter the access code
• Enter the three-digit access PIN (preset as
111 ) . T he display shows the prompt Di al
admi code.
n
• Enter the required admin code.
• Enter any required data.
• To enter another admin code, step back to the
Di al admi code prompt by pressing #. Some
n
features require you to press # more than
once.
• To finish programming, replace the handset
or press HANDS FREE.
Any programming changes you make will be
saved when you leave programming mode or
step back to the main prompt.
If at any

Busy lamp field

If a Systemphone is being used to program
the system, once the programming code is
entered 12 of the 16 keys and lights operate
as a Busy Lamp Field, which shows the
programming status of each extension.
When a light is on it indicates that the
associated extension is programmed.
To enter or remove an extension you may
press the key associated with the extension,
or you may dial the extension number.
When you press the key or dial the extension
number, the number will appear on the
display.
(70).
Changi,ng access code (PIN)
the
On reset, code 111 will be set. To change the
code:
• From the programming position, dial
followed by your existing PIN. T he
Systemphone shows Di al admi
•Dial the admin code (O).
shows the existing PIN.
•Enter your new three-digit PIN. This
be used for retrieving voice messages remotely if
the Voice Module is fitted.(see page 34)
If you enter a new code of only
original code will be retained. If you enter 4
digits, the first 3 digits will be accepted
new code.
20 ___. oc=J
21 ___. oc=J
22 ___. o c=J
23 ___. oc=J
24 ___. oc=J
25 ___. oc=J
oc=J
oc=J
T he left hand column of keys represents
extensions 20 to 25;
represents extensions
70
code.
n
T he Systemphone
will also
or digits the
1 2
the
as
c=J o �26
c=J o �27
c=Jo �28
c=J o �29
c=Jo �30
c=Jo +-:- 31
c=Je
c=Jo
the right hand column
to 31.
26
37