Speed Dial Numbers - BT Revelation Owner's Handbook Manual

features
Other

Speed dial numbers

Speed dial numbers enable you to dial
frequently-used numbers using two- or three­
digit codes, or by pressing a single key.
Pause
When programming a speed dial number, you
may insert a pause of 1.5 seconds between
digits by pressing the
feature can only be used with a programmed
key, so this facility is only available on a
Systemphone.
To program the pause feature onto a key
•Press#
• Press the key to be programmed.
(56).
• Dial the code
• Press
HANDS FREE.
Personal speed dial numbers
You can program up to ten personal numbers
in your Systemphone or telephone. You can
also program numbers directly onto the
programmable keys on the Systemphone.
To program a personal speed dial number
(62).
•Dial the code
•Enter the location
store the number.
• Dial the number you want to store.
• Press
HANDS FREE.
To access a personal speed dial number
• Press the pre-programmed
key or dial the code
• Dial the location
wish to access. The number is automatically
dialled.
To program a speed dial number onto a
Systemphone programmable key
•Press#.
• Press the key to be programmed.
9
• Dial followed by the external number you
want to store.
• Press
HANDS FREE.
18
Pause key
key. The pause
PAUSE
Speed Nos 61-62
(0-9 )
where you want to
Speed Nos 61-62
SPD ACCESS
(61).
(0-9)
of the number you
To access a speed dial number on a key
• Press the key. The number is automatically
dialled.
System speed dial numbers
NOTE: Earlier software releases only had 50
speed dials in locations 650- 699.
100 system speed dial numbers may be
programmed into locations 800-899 as
described below. Users of the system may
then access these numbers using the codes
800-899, provided that they have access via
the appropriate class of service.
The Call restrictions section on pages 29 and
30 includes a description of the System speed
dial numbers - Class of service override facility.
This allows an extension to access all system
speed dial numbers, even though the
extension may be restricted from directly
dialling these numbers because of their Class
of service.
To add or delete a system speed dial
number
• From the programming position dial 70
followed by the system PIN. The
Systemphone display shows Di al admi
(5).
• Dial the admin code
(00-99)
•Enter the location
you wish to store the number.
With no number programmed, the Systemphone
shows 5 XX - - - - - - where XX is the
-
location. If a number is already programmed
in a location, it will be displayed when the
location number is entered.
• Dial the number you want to store, or press *
to delete a programmed number.
• Press to enter another number.
HANDS FREE
• Press again to finish
HANDS FREE
programmmg.
Up to 30 digits may be stored in any location. If
a number has more than 16 digits the first 15
are displayed followed by the letter p. To view the
hidden digits press the L 1 key.
1 These feature codes are used in earlier software
releases of BT Revelation
code.
n
(50-99)1
or where