Channel Mode Setting; Dimming Mode Setting; Display Setting; Custom Color Setting - Blizzard Lighting TOURnado IP BAY Manual

Illustrations: When pressing the【YES】button which means valid on the【USE】interface, the actual output value
of RED，GREEN，BLUE，AMBER,WHITEis output in accordance with the percentage which the color cast
calibration value divides 255.

6.7 CHANNEL MODE SETTING

1) Press the【ENTER】button in 【CHMD】menu, then enter to the channel mode setting.
2) Press the【UP/DOWN】button to select【16CH】，【11CH】，【10CH】，【11CH.】，【6CH】，【5CH
】
3) Press the【ENTER】button to escape and save.

6.8 DIMMING MODE SETTING

1) Press the【ENTER】button in【DIM】menu, then enter to the dimming mode setting.
2) Press the【UP/DOWN】button to select【LIN】，【SQR】，【ISQR】，【SCUR】，【LIN.】，【SQR.
】，【ISQR.】and【SCUR.】.
3) Press the【ENTER】button to escape and save.
Illustrations：When setting【LIN.】，【SQR.】，【ISQR.】and 【SCUR.】 in 【DIM】 menu, there will be
added a little delay dimming effect for smooth..
Dimming curve:
Linear curve: square law curve: Inverse Square law curve: S-curve:

6.9 DISPLAY SETTING

1) Press the【ENTER】button in【DISY】menu, then enter to the display setting.
2) Press the【UP/DOWN】button to select【ON】，【2 MINITES OFF】
3) Press the【ENTER】button to escape and save.
6.10

CUSTOM COLOR SETTING

1) Press the 【ENTER】 button in 【CTST】 menu, then enter to the custom color setting.
2) Press the 【UP/DOWN】 select 【CT01】...【CT10】
13