Related Manuals for Blizzard Lighting LB HEX
Summary of Contents for Blizzard Lighting LB HEX
- Page 1 Blizzard Lighting, LLC www.blizzardlighting.com Waukesha, WI USA Copyright (c) 2017...
-
Page 2: Table Of Contents
Static Colors, Strobe, & Sound Active Mode Manual Color Mixing LED Display On/Off 14 Dimming Curve & Speed Settings DMX Channel Values In-Depth 5. Appendix Keeping Your LB Hex™ As Good As New Returns (Gasp!) Shipping Issues Tech Specs Troubleshooting Dimensional Drawings Internal/External Parts... -
Page 3: Lb Hex
Getting It Out Of The Box Congratulations on your purchase of one super-cool 6-in-1 LED PAR can! Now that you’ve got your LB Hex™ (or hopefully, more!), you should carefully unpack the box and check the contents to ensure that all parts are present and in good condition. If anything looks as if it has been damaged in transit, notify the shipper immediately and keep the packing material for inspection. -
Page 4: Safety Instructions (Don't Stick Your Hand In The Toaster!)
• Avoid direct eye exposure to the light source while it is on. Caution! There are no user serviceable parts inside the unit. Do not open the housing or attempt any repairs yourself. In the unlikely event your unit may require service, please contact Blizzard Lighting online at www.blizzardlighting.com/support. Page 4 LB-Hex User Manual Rev. -
Page 5: Meet The Lb Hex
Red Intensity (0% <-> 100%) Green Intensity (0% <-> 100%) Blue Intensity (0% <-> 100%) Amber Intensity (0% <-> 100%) White Intensity (0% <-> 100%) UV Intensity (0% <-> 100%) Page 5 LB-Hex User Manual Rev. B © 2017 Blizzard Lighting, LLC... -
Page 6: The Lb Hex™ Pin-Up Picture
Figure 1: The LB Hex™ Pin-Up Picture Heavy-Duty 12* 6-in-1 Composite Housing RGBAW+UV LEDs Secure Grip Locking Knobs Dual Mounting Brackets Figure 2: The Rear Connections Mic Sensitivity Menu Display Microphone Menu Buttons Power Out Power In DMX In DMX Out Page 6 LB-Hex User Manual Rev. -
Page 7: Setup
Under normal operating conditions, the fuse should not require replacement. The fuse is field replaceable, however it is an advanced procedure suited to qualified individuals. Should your LB Hex™ fuse require replacement, please contact Bliz- zard Lighting for instructions, or to return your unit for service. Connecting A Bunch of LB Hex™ Fixtures... -
Page 8: Cable Connectors
(input). Note: It doesn’t matter which fixture address is the first one connected. We recommend connecting the fixtures in terms of their proximity to the controller, rather than connecting the lowest fixture number first, and so on. Step 3: Connect other fixtures in the chain from output to input as above. Place a DMX terminator on the output of the final fixture to ensure best communication. Page 8 LB-Hex User Manual Rev. B © 2017 Blizzard Lighting, LLC... -
Page 9: Fixture Linking (Master/Slave Mode)
• When selecting installation location, take into consideration lamp replacement access (if applicable) and routine maintenance. • Safety cables MUST ALWAYS be used. • Never mount in places where the fixture will be exposed to rain, high humidity, extreme temperature changes or restricted ventilation. Page 9 LB-Hex User Manual Rev. B © 2017 Blizzard Lighting, LLC... -
Page 10: Using This Fixture With The Wicicle® Wireless Dmx System
® UNDER NO CIRCUMSTANCES IS BLIZZARD LIGHTING RESPON- SIBLE FOR ANY DAMAGE FROM SUCH OPERATION. • Fixtures bearing the above logo MUST only use cable and connectors which separate chassis/case ground from cable shielding. Cabling with the shield connected to the con- nector’s case/chassis may cause malfunction and damage to the wiCICLE... -
Page 11: Operating Adjustments
4. OPERATING ADJUSTMENTS The Control Panel All the goodies and different modes possible with the LB Hex™ are ac- cessed by using the control panel on the rear of the fixture. There are 4 control buttons below the LED display which allow you to navigate through the various control panel menus. <MENU> Is used to navigate to the previous higher-level menu item. <ENTER> Is used to select and confirm/store the current selection. -
Page 12: Control Panel Menu Structure
1.) Navigate the main menu until you reach Pr--, and press <ENTER>. 2.) Use the <UP/DOWN> buttons to choose any of its built-in programs from 1-13. 3.) Press the <ENTER> button to confirm your choice. 4.) You can then adjust the speed of the program. Page 12 LB-Hex User Manual Rev. B © 2017 Blizzard Lighting, LLC... -
Page 13: Static Colors, Strobe, & Sound Active Mode
1.) Navigate the main menu until you reach node, and press <ENTER>. 2.) Use the <UP/DOWN> buttons to highlight a speed from 0-4 (fast <--> slow). 3.) Press the <ENTER> button to confirm. Page 13 LB-Hex User Manual Rev. B © 2017 Blizzard Lighting, LLC... -
Page 14: Dmx Channel Values In-Depth
106 <--> 155 Mode 2 = 32-bit, 0-50% intensity range 156 <--> 205 Mode 3 = 32-bit, 0-75% intensity range 206 <--> 255 Mode 4 = 32-bit, full intensity dimming Page 14 LB-Hex User Manual Rev. B © 2017 Blizzard Lighting, LLC... -
Page 15: Appendix
In summary, since its design and evolution in the 1980’s DMX has become the standard for lighting control. It is flexible, robust, and scalable, and its ability to control everything from dimmer packs to moving lights to foggers to lasers makes it an indispensable tool for any lighting designer or lighting performer. Page 15 LB-Hex User Manual Rev. B © 2017 Blizzard Lighting, LLC... -
Page 16: Keeping Your Lb Hex™ As Good As New
Keeping Your LB Hex™ As Good As New The fixture you’ve received is a rugged, tough piece of pro lighting equip- ment, and as long as you take care of it, it will take care of you. That said, like anything, you’ll need to take care of it if you want it to operate as designed. -
Page 17: Tech Specs
Also check that speed channels are set appropriately. No Response to Audio Verify that the fixture is in “Sound Active” mode. If your problem persists or isn’t listed, please open a support ticket online at: www.blizzardlighting.com/support. Page 17 LB-Hex User Manual Rev. B © 2017 Blizzard Lighting, LLC... -
Page 18: Dimensional Drawings
Dimensional Drawings 11.2 in (284 mm) 9.8 in (248.2 mm) DISCLAIMER: The power connector fitted to the fixture and fixture cord are designed for compatibility with products manufactured by Neutrik AG, Neutrik USA and their related entities, however they are not manufactured by, affiliated with or endorsed by Neutrik AG, Neutrik USA, or any related entity. Neutrik® and powerCON® are registered trademarks of Neutrik AG. Page 18 LB-Hex User Manual Rev. B © 2017 Blizzard Lighting, LLC... -
Page 19: Internal/External Parts
PCB-DMX canon socket Lamps Power supply Copper pillar Master PCB PCB-lamp board Outer bracket Radiator Knob Copper pillar Rubber gasket 8015 fan Inner bracket PowerCon™ compatible input Bottom housing cover Page 19 LB-Hex User Manual Rev. B © 2017 Blizzard Lighting, LLC... - Page 20 Enjoy your product! Our sincerest thanks for your purchase! --The team @ Blizzard Lighting...