Related Manuals for Blizzard Lighting Hypno Beam
Summary of Contents for Blizzard Lighting Hypno Beam
-
Page 1: Hypno™ Beam Moving Head
Blizzard Lighting, LLC www.blizzardlighting.com Waukesha, WI USA Copyright (c) 2017... -
Page 2: Table Of Contents
Troubleshooting 5. Appendix A Quick DMX Lesson Keeping Your Hypno™ Beam As Good As New Returns (Gasp!) Shipping Issues Tech Specs Dimensional Drawings Colors and Gobos Photometric Data Page 2 Hypno™ Beam Manual Rev. A © 2017 Blizzard Lighting, LLC... -
Page 3: Getting Started
Blizzard Lighting™ assumes no responsibility or liability for any errors or omissions that may appear in this user manual. Blizzard Lighting™ reserves the right to update the existing document or to create a new document to correct any errors or omissions at any time. -
Page 4: Safety Instructions (Don't Stick Your Hand In The Toaster!)
Caution! There are no user serviceable parts inside the unit. Do not open the housing or attempt any repairs yourself. In the unlikely event your unit may require service, please open a support ticket at www. blizzardlighting.com/support. Page 4 Hypno™ Beam Manual Rev. A © 2017 Blizzard Lighting, LLC... -
Page 5: Meet The Hypno™ Beam
Ring 2 - Blue Intensity (0% <--> 100%) Ring Strobe (slow <--> fast) Ring Dimmer (0% <--> 100%) Ring Color Macros Ring Speed (slow <--> fast) Color Macros Auto Programs, Sound Active Mode, and Reset Page 5 Hypno™ Beam Manual Rev. A © 2017 Blizzard Lighting, LLC... -
Page 6: The Hypno™ Beam Pin-Up Picture
RGBW LED LED Ring 1 (inner) LED Ring 2 (outer) 4-Button LED Control Panel Figure 2: The Rear Connections DMX Input Fuse Holder Power Input DMX Output Power Output Page 6 Hypno™ Beam Manual Rev. A © 2017 Blizzard Lighting, LLC... -
Page 7: Setup
Maximum capacitance between conductors – 30 pF/ft. Maximum capacitance between conductor & shield – 55 pF/ft. Maximum resistance of 20 ohms / 1000 ft. Nominal impedance 100 – 140 ohms Page 7 Hypno™ Beam Manual Rev. A © 2017 Blizzard Lighting, LLC... -
Page 8: Cable Connectors
Step 3: Connect other fixtures in the chain from output to input as above. Place a DMX terminator on the output of the final fixture to ensure best communication. Page 8 Hypno™ Beam Manual Rev. A © 2017 Blizzard Lighting, LLC... -
Page 9: Fixture Linking (Master/Slave Mode)
• Safety cables MUST ALWAYS be used. • Never mount in places where the fixture will be exposed to rain, high humidity, extreme temperature changes or restricted ventilation. Page 9 Hypno™ Beam Manual Rev. A © 2017 Blizzard Lighting, LLC... -
Page 10: Mounting Points
Better safe than sorry! Be sure to complete all rigging and installation procedures before connecting the main power cord to the appropriate wall outlet. Page 10 Hypno™ Beam Manual Rev. A © 2017 Blizzard Lighting, LLC... -
Page 11: Clamp Mounting
3.) ¼ Turn Quick Lock Fasteners Securing the Fixture Regardless of the rigging option you choose for your fixtures always be sure to secure your fixture with a safety cable. Page 11 Hypno™ Beam Manual Rev. A © 2017 Blizzard Lighting, LLC... -
Page 12: Operating Adjustments
<UP/DOWN> buttons to scroll through any submenu options. You can the press <ENTER> to save any changes made, or press the <MENU> button to exit without saving. Page 12 Hypno™ Beam Manual Rev. A © 2017 Blizzard Lighting, LLC... -
Page 13: Control Panel Menu Structure
Tilt Fine (0-255) On/Off LED display backlight On/Off Disp <ENTER> Reverse Display Fhrs <ENTER> Operating Time <ENTER> Software Version Rest <ENTER> Reset Defa <ENTER> Factory Default Setting Reset Page 13 Hypno™ Beam Manual Rev. A © 2017 Blizzard Lighting, LLC... -
Page 14: Dmx Mode
4.) For mic sensitivity, navigate the main menu to Sens, press <ENTER>. 5.) Then use the <UP/DOWN> buttons to choose the microphone sensitivity level ranging from 0% to 99%, and press <ENTER>. Page 14 Hypno™ Beam Manual Rev. A © 2017 Blizzard Lighting, LLC... -
Page 15: Pan Inverse
3.) Use the <UP/DOWN> buttons to choose either Hold (holds the current status), Blac (no light output), Soun (run sound mode), or Auto (run auto programs), then press <ENTER> to confirm, or <MENU> to exit. Page 15 Hypno™ Beam Manual Rev. A © 2017 Blizzard Lighting, LLC... -
Page 16: Dmx Channel Values In-Depth
RGB Ring Zoom In 156 <--> 160 Switch Effect Between R/G/B 161 <--> 165 Color Change Effects 166 <--> 255 Multi-Ring Chase - 9 effects total, each 10 digits Page 16 Hypno™ Beam Manual Rev. A © 2017 Blizzard Lighting, LLC... -
Page 17: Troubleshooting
Responding / Use Only DMX Cables and/or check cables for defects Responding Errati- Install a Terminator. cally Reset fixture(s). If your problem persists or isn’t listed, visit www.blizzardlighting.com/support. Page 17 Hypno™ Beam Manual Rev. A © 2017 Blizzard Lighting, LLC... -
Page 18: Appendix
It is flexible, robust, and scalable, and its ability to control everything from dimmer packs to moving lights to foggers to lasers makes it an indispensable tool for any lighting designer or lighting performer. Page 18 Hypno™ Beam Manual Rev. A © 2017 Blizzard Lighting, LLC... -
Page 19: Keeping Your Hypno™ Beam As Good As New
Damage incurred in shipping is the responsibility of the shipper, and must be reported to the carrier immediately upon receipt of the items. Claims must be made within seven (7) days of receipt. Page 19 Hypno™ Beam Manual Rev. A © 2017 Blizzard Lighting, LLC... -
Page 20: Tech Specs
14.2" (36 cm) 28.4" (72 cm) Luminous Intensity: Beam 1m lux 1m fc 2.5m lux 2.5m fc 5m lux 5m fc 8° 77,372 7,188.1 15,330 1,424.2 3,747 348.1 Page 20 Hypno™ Beam Manual Rev. A © 2017 Blizzard Lighting, LLC... -
Page 21: Dimensional Drawings
Dimensional Drawings 10.5” (265 mm) 3.5” (88 mm) 6.6” (168 mm) 5.3” (135 mm) Page 21 Hypno™ Beam Manual Rev. A © 2017 Blizzard Lighting, LLC... -
Page 22: Colors And Gobos
This page is intentionally left blank. Page 22 Hypno™ Beam Manual Rev. A © 2017 Blizzard Lighting, LLC... - Page 23 This page is intentionally left blank. Page 23 Hypno™ Beam Manual Rev. A © 2017 Blizzard Lighting, LLC...
- Page 24 Enjoy your product! Our sincerest thanks for your purchase! --The team @ Blizzard Lighting...