DMX Mode
Allows the unit to be controlled by any universal DMX controller.
Set the Starting DMX Address:
1.) Navigate the menu until you reach Address, and press <ENTER>.
2.) Use the <UP/DOWN/MENU/ENTER> buttons to select a channel from 001-512.
3.) Press the <ENTER> button to confirm.
Select the DMX Channel Mode:
1.) Navigate the menu until you reach Mode, and press <ENTER>.
2.) Highlight 12Ch, 13Ch, or 15Ch, and press <ENTER> to confirm your choice.
Auto, Sound Active, & Manual Adjustments:
Allows a single or Master/Slaved units to run factory installed programs at user selectable speeds.
Auto Mode:
1.) Navigate the menu until you reach Mode, and press <ENTER>.
2.) Use the <UP/DOWN> buttons to select Auto (Alone), or Auto (Master).
3.) Press the <ENTER> button to confirm your selection.
Sound Active Mode:
1.) Navigate the menu until you reach Mode, and press <ENTER>.
2.) Use the <UP/DOWN> buttons to select Sound (Alone), or Sound (Master).
3.) Press the <ENTER> button to confirm your selection.
Device Options:
The options menu contains various configurable settings for the fixture.
Pan/Tilt Swap, Pan/Tilt Reverse:
1.) Navigate the menu until you reach Option, and press <ENTER>.
2.) Then navigate to Invert Swap, Pan Reverse, or Tilt Reverse and press <ENTER>.
3.) Use the <UP/DOWN> buttons to highlight On or Off, and press <ENTER>.
Shortcut ON/OFF:
1.) Navigate the menu until you reach Option, and press <ENTER>.
2.) Then navigate to Shortcut ON/OFF and press <ENTER>.
3.) Use the <UP/DOWN> buttons to highlight On or Off, and press <ENTER>.
DMX Lost Set:
1.) Navigate the menu until you reach Option, and press <ENTER>.
2.) Then navigate to DMX Lost Set and press <ENTER>.
3.) Use <UP/DOWN> to select On (hold), or Off (blackout), and press <ENTER>.
Display Reverse:
1.) Navigate the menu until you reach Option, and press <ENTER>.
2.) Then navigate to Display Reverse and press <ENTER>.
3.) Highlight On (flipped menu display) or Off, and press <ENTER>.
Display Delay Off:
1.) Navigate the menu until you reach Option, and press <ENTER>.
2.) Then navigate to Display Delay Off and press <ENTER>.
3.) Highlight On (shuts off after 30s), or Off (always on), and press <ENTER>.
Super-G™ 150 User Manual - Rev. A
(determines if the gobo/color wheels take the shortest path)
(if the DMX signal is lost, fixture will revert to this setting)
Page 12
(c) 2018 Blizzard Lighting, LLC