Control Panel Menu Structure; Dmx Mode; Select The Dmx Starting Address; Select The Channel Mode - Blizzard Lighting Shoqwave X6 User Manual

Control Panel Menu Structure

Addr
Chnd
SLnd
Shnd
Sens
Led
Disp
Pan
Tilt
Test
Ver
Reld

DMX Mode

Allows the unit to be controlled by any universal DMX controller.
Select the Starting DMX Address
1.) Navigate the main menu to reach Addr, press <ENTER>.
2.) Use the <UP/DOWN> buttons to choose a starting DMX address ranging from
001-512, press <ENTER> to confirm, or <MENU> to exit.

Select the Channel Mode

1.) Navigate the main menu to reach Chnd, press <ENTER>.
2.) Use the <UP/DOWN> buttons to highlight 17Ch or 38Ch, press <ENTER>.

Master/Slave Mode Settings

1.) Navigate to highlight SLnd, press <ENTER>.
2.) Use the <UP/DOWN> buttons to choose Mast (master) or Slau (slave), and
press <ENTER>.
Auto and Sound Active Modes:
Allows a single or Master/Slaved units to run factory installed programs.

Auto Mode

1.) Navigate the main menu to reach Shnd, press <ENTER>.
2.) Use the <UP/DOWN> buttons to highlight Auto, press <ENTER>.

Sound Active Mode

1.) Navigate the main menu to reach Shnd, press <ENTER>.
2.) Use the <UP/DOWN> buttons to highlight Soun.
3.) Press the <ENTER> to confirm, or <MENU> to exit.
4.) For mic sensitivity, navigate the main menu to Sens, and press <ENTER>.
5.) Highlight a level ranging from 0% to 100%, and press <ENTER>.
Shoqwave™ X6 Manual Rev. A
001-512
17Ch
38Ch
Mast
Slav
Soun
Auto
000-100
On/Off
Yes/No
Yes/No
Yes/No
<ENTER>
<ENTER>
<ENTER>
Set the starting address from 001-512
17-channel DMX mode
38-channel DMX mode
Master mode
Slave mode
Sound active mode
Auto mode
Mic sensitivity level
Turns display on/off when inactive
Reverse display
Pan reverse
Tilt reverse
Auto test
Software version
Reset to factory default settings
Page 11
© 2019 Blizzard Lighting, LLC