The Control Panel; Control Panel Menu Structure; Dmx Mode; Select The Dmx Starting Address - Blizzard Lighting Flurry Z Manual

Control Panel Menu Structure

Addr
CH Mode
Dim
Input
Inv Pan
Inv Til

DMX Mode

Allows the unit to be controlled by any universal DMX controller.
Select the Starting DMX Address
1.) Navigate the main menu to reach Addr, press <ENTER>.
2.) Use the <UP/DOWN> buttons to choose a starting DMX address ranging from
001-512, press <ENTER> to confirm, or <MENU> to exit.
Select the DMX Channel Mode
1.) Navigate the main menu to reach CH Mode, press <ENTER>.
2.) Use the <UP/DOWN> buttons to highlight your choice, and press <ENTER>.

Select the DMX Run Mode

1.) Navigate to Input > Run Mode, then DMX512, and press <ENTER>.

Master/Slave Mode Settings

1.) Daisy chain fixtures together via DMX input/output connections.
2.) On slave units, navigate to Input > Slave Mode, then Slave 1 or Slave 2.
3.) Slave 1 fixtures will follow the master exactly, and Slave 2 fixtures will have
contrasting movements to the master fixture.

Auto and Sound Active Modes

Allows a single or Master/Slaved units to run factory installed programs.
1.) Navigate to Input > Run Mode, then DMX512, and press <ENTER>.
2.) Highlight Auto or Sound and press, and press <ENTER>.
3.) To adjust the mic sensitivity level for use during sound active mode, navigate
to Input > Sound Sensitivity, and press <ENTER>.
4.) Use the <UP/DOWN> buttons to choose a sensitivity level ranging from 001-
100, then press <ENTER> to confirm.
Flurry™ Z Manual Rev. A
Address
Channels
Dimmer Profiles
Main Menu
Slave Mode
Sound Sensitivity
DMX Fail
Backlight
Version
Invert Pan
Invert Tilt
Page 12
Set the starting address (001-512)
8 Channels
15 Channels
23 Channels
Fast fade
Smooth dimming
Display Invert
Run Mode
Slave 1 (normal)
Slave 2 (contrast movement)
Sound Sensitivity (001-100)
Blackout
Hold (last signal)
On
Off
Software version information
Yes
No
Yes
No
Yes
No
DMX512
Auto
Sound
(default action upon
loss of signal)
© 2019 Blizzard Lighting, LLC