Dmx Mode; Select Channel Mode & Starting Dmx Address; Master/Slave Mode; Manual Output Level Settings - Blizzard Lighting LB Bar CSI User Manual

DMX Mode

Allows the unit to be controlled by any universal DMX controller.
Select Channel Mode & Starting DMX Address:
1.) Navigate the main menu until you reach either d3-- (3ch mode), or
d.1-- 1ch mode, and press <ENTER>.
2.) Use the <UP/DOWN> buttons to select a starting DMX address
ranging from 1-512, and press the <ENTER> button to confirm.

Master/Slave Mode:

1.) Daisy chain fixtures DMX input/output connections.
2.) Set the DMX channel mode on fixtures to match either d.3 or d.1.
3.) Set the starting DMX channel as needed.
2.) The first fixture in the DMX chain is the master fixture, and the
following fixtures will follow the master.

Manual Output Level Settings:

Manually set the UV intensity output level as follows:
1.) Navigate the main menu until you reach N--, and press <ENTER>.
2.) Use the <UP/DOWN> buttons to adjust intensity level anywhere
from 000-255 (0% <--> 100%).
3.) Press the <ENTER> button to confirm.

Strobe Effects

1.) Navigate the main menu until you reach F---, and press <ENTER>.
2.) Then use the <UP/DOWN> buttons to select a strobe speed setting
from 0-255 (slow <--> fast).
3.) Press the <ENTER> button to confirm.

Dimming Curve Settings:

You can manually set the fixtures dimming curve of your choice:
1.) Navigate the main menu until you reach dr--, and press <ENTER>.
2.) Use the <UP/DOWN> buttons to highlight dr-0 to dr-04.
3.) Press the <ENTER> button to confirm.
LB™ Bar CSI User Manual Rev. A
Page 12
© 2017 Blizzard Lighting, LLC