Select The Dmx Channel Mode; Dimming Mode Settings; Led Display And Key Lock Setting - Blizzard Lighting TOURNADO CSI COB User Manual

Dimming Mode Settings:

Allows users to set the fixture to use 1 of 4 (x2) dimming curve settings for smoother (and slower)
dimming capabilities. In the control panel menu, there are two settings for each curve that are
distinguishable from one another by the trailing dot.
DMX%
Linear Curve
(LIN, LIN.)
*The curve settings with the trailing dot adds a bit more delay to the curve for a smoother effect.
1.) Use the <MENU> and <UP/DOWN> buttons to navigate to SET and press <ENTER>,
then <UP/DOWN> buttons again to scroll to DIM, and press the <ENTER> button.
2.) Now use the <UP/DOWN> buttons to highlight either LIN (Linear), SQR (Square), ISQR
(Inverse Square), SCUR (S-Curve), LIN. (Smooth Linear), SQR. (Smooth Square), ISQR.
(Smooth Inverse Square), or SCUR. (Smooth S-Curve), then hit <ENTER>.
LED Display On/Off:
1.) Use the <MENU> and <UP/DOWN> buttons to navigate to SET and press <ENTER>,
then navigate to DISY, and press the <ENTER> button.
2.) In DISY, you can set the LED menu display to be continually on, or shut off after 2 minutes
of inactivity.
LED Display Lock:
1.) Use the <MENU> and <UP/DOWN> buttons to navigate to SET and press <ENTER>,
then navigate to LOCK, and press the <ENTER> button.
2.) Select YES or NO, and press <ENTER> to save. Setting to YES will disable the functionality
of the buttons after 2 minutes of inactivity. To exit the locked state, press: <MENU>, <UP>,
<DOWN>, <ENTER>, <MENU>, <UP>, <DOWN>, <ENTER>, <MENU>, <UP>,
<DOWN>, <ENTER> with no longer than 3 seconds between each button press.
TOURnado™ CSI COB User Manual Rev. C
DMX%
Square Law Inverse Square Law
(SQR, SQR.)
Page 12
DMX%
(ISQR, ISQR.)
© Copyright 2015 Blizzard Lighting, LLC
DMX%
S-Curve
(SCUR, SCUR.)