Setting The Dmx Channel Mode; Setting The Dmx Address; Auto Mode (Built-In Programs); Custom Color Adjustments - Blizzard Lighting TOUGHPAR ZOOM RGBAW User Manual

Setting the DMX Channel Mode:

To control the fixture with DMX, first select one of the DMX control channel modes (5/7/9 or 11ch.)
1.) To select a DMX channel mode, press the <MEnU> button, then use the <UP/DOWn> buttons until the
Chnd
display reads
2.) Then use the <UP/DOWn> buttons until the display reaches your desired channel mode.
3.) Push the <EnTER> button to confirm your choice.

Setting the DMX Address:

1.) Press the <MEnU> button, then use the <UP/DOWn> buttons until the display reads
the <EnTER> button.
2.) Use the <UP/DOWn> buttons to set the appropriate DMX address from
3.) Push the <EnTER> button to confirm your choice.

Auto Mode (Built-in Programs):

1.) Press the <MEnU> button, then use the <UP/DOWn> buttons until the display reads
the <EnTER> button.
2.) Then use the <UP/DOWn> buttons to choose your desired program from
<EnTER> button. Notice that you can now adjust the chase speed:
3.) Use the <UP/DOWn> buttons to set your desired speed from
4.) Push the <EnTER> button to confirm your choice.

Custom Color Adjustments:

1.) Press the <MEnU> button until the display reads
2.) Press the <UP/DOWn> buttons until the display reads
BLUE
sity, 0-255),
and adjust to your desired values. Push the <EnTER> button to confirm.
3.) Push the <EnTER> button to confirm.
Note: These settings will effect the fixture GLOBALLY, IE in any mode.

32-Bit Dimmer Mode Settings:

• Dimming Mode 1 = 32-bit, 0-25% intensity range
• Dimming Mode 2 = 32-bit, 0-50% intensity range
• Dimming Mode 3 = 32-bit, 0-75% intensity range
• Dimming Mode 4 = 32-bit, full intensity dimming
1.) Press the <MEnU> button, then use the <UP/DOWn> buttons until the display reads
the <EnTER> button
2.) Then use the <UP/DOWn> buttons to choose from
4.) Push the <EnTER> button to confirm your choice.

Color Temperature-Based White Balance:

This is used to setup and store up to 10 separate custom white balance settings using R/G/B/A/W values.
1.) Press the <MEnU> button, then use the <UP/DOWn> buttons until the display reads
the <EnTER> button
2.) Then use the <UP/DOWn> buttons to choose from
3.) Press the <UP/DOWn> buttons until the display reads
BLUE
sity, 0-255),
and adjust to your desired values.
4.) Push the <EnTER> button to confirm your choice.
ToughPAR Zoom RGBAW Manual Rev. A
and press the <EnTER> button.
(Blue intensity, 0-255),
.
.
(Blue intensity, 0-255),
000
STAT
and press the <EnTER> button.
RED
(Red intensity, 0-255),
WHIT
(White intensity, 0-255), or
DIM1 DIM4
to
WT01 WT10
to
RED
(Red intensity, 0-255),
WHIT
(White intensity, 0-255), or
Page 12
Addr
001 -512
.
AUTO
AT01-AT10,
SP--.
255
to (fast <--> slow).
GREN
AMB
(Amber intensity, 0-255)
DIM
.
WTST
and press the <EnTER> button.
GREN
AMB
(Amber intensity, 0-255)
Copyright (c) 2013 Blizzard Lighting, LLC
and press
, and press
and press the
(Green inten-
and press
and press
(Green inten-