Dmx Mode; Set The Starting Dmx Address; Select The Dmx Channel Mode; Slave Mode - Blizzard Lighting PROPAR COB RGBAW Manual

DMX Mode

Allows the unit to be controlled by any universal DMX controller.

Set the Starting DMX Address:

1.) Navigate the main menu until you reach Mode, press <ENTER>.
2.) Use the <UP/DOWN> buttons to highlight Address, and press <ENTER>.
3.) Now use the <UP/DOWN> buttons to select a channel from 1-512.
4.) Press the <ENTER> button to confirm.

Select the DMX Channel Mode:

1.) Navigate the main menu until you reach Mode, press <ENTER>.
2.) Use the <UP/DOWN> buttons to highlight DMX Mode, press <ENTER>.
3.) Now use the <UP/DOWN> buttons to highlight a channel mode.
4.) Press the <ENTER> button to confirm your selection.

Slave Mode:

1.) Navigate the main menu until you reach Mode, press <ENTER>.
2.) Use the <UP/DOWN> buttons to highlight Slave, press <ENTER>.
Auto, Sound Active, & Manual Adjustments
Allows a single or Master/Slaved units to run factory installed programs at user selectable speeds.

Color Macros:

1.) Navigate the main menu until you reach Mode, press <ENTER>.
2.) Use the <UP/DOWN> buttons to highlight Macro, press <ENTER>.
3.) Now use the <UP/DOWN> buttons to select a program from 1-15.
4.) Press the <ENTER> button to confirm your selection.
5.) To run a color macro with either color jumping or color fade, navigate the menu to Mode >
Jumping or Mode > Fading. From here, you can adjust the program speed (slow to fast), and
add a strobe effect with adjustable 0-20Hz rate.

Auto Mode:

1.) Navigate the main menu until you reach Mode, press <ENTER>.
2.) Use the <UP/DOWN> buttons to highlight Auto, press <ENTER>.

Sound Active Mode:

1.) Navigate the main menu until you reach Mode, press <ENTER>.
2.) Use the <UP/DOWN> buttons to highlight Sound, press <ENTER>.
3.) Now adjust the mic sensitivity from 0-99, then press <ENTER>.

Static Colors:

1.) Navigate the main menu until you reach Static, press <ENTER>.
2.) Use the <UP/DOWN> buttons to highlight your choice, press <ENTER>.
3.) Adjust the intensity level (or strobe speed) by selecting a value from 0-255.
4.) Press the <ENTER> button to confirm your selection.
System Settings
Adjust system settings, access system test function, and factory reset functions.

Display Settings:

1.) Navigate the main menu until you reach Settings, press <ENTER>.
2.) Use the <UP/DOWN> buttons to highlight Display, and press <ENTER>.
3.) Now use the <UP/DOWN> buttons to highlight On which keeps the menu display on
continually, or Off which turns the menu display off after 30s of inactivity.
4.) Press the <ENTER> button to confirm your selection.
ProPar COB RGBAW Manual - Rev. B
Page 12
(c) 2019 Blizzard Lighting, LLC