Installing And Connecting The Device; Preparing For Installation; Checking The Delivery Package - Siemens SIMATIC IPC277G Operating Instructions Manual

Installing and connecting the device

3.1

Preparing for installation

3.1.1

Checking the delivery package

Procedure
1. When accepting a delivery, check the packaging for visible transport damage.
2. If any transport damage is present at the time of delivery, lodge a complaint at the shipping
company in charge. Have the shipper confirm the transport damage immediately.
3. Unpack the device at its installation location.
4. Keep the original packaging in case you have to transport the unit again.
5. Check the contents of the packaging and any accessories you ordered for completeness and
damage.
Note
Damage to the device during transport and storage
If a device is transported or stored without packaging, shocks, vibrations, pressure and
moisture may impact the unprotected unit. A damaged packaging indicates that ambient
conditions have already had an impact on the device.
The device might be damaged.
Do not dispose of the original packaging. Pack the device during transportation and
storage.
SIMATIC IPC277G
Operating Instructions, 08/2021, A5E50059956-AA
3
19