Markings And Symbols; Overview; Safety; Operator Controls - Siemens SIMATIC IPC547J Operating Instructions Manual

Markings and symbols

C.1

Overview

The following tables show all the symbols which may be found on your SIMATIC industrial PC,
SIMATIC industrial monitor or SIMATIC Field PG in addition to the symbols which are
explained in the operating instructions.
The symbols on your device may vary in some details from the symbols shown in the
following tables.
C.2

Safety

Symbol Meaning
Warning, observe the supplied
documentation.
Attention, radio equipment
Disconnect the power plug before
opening
Attention ESD (Electrostatic sensitive
device)
C.3

Operator controls

Symbol Meaning
On/off switch, without electrical
isolation
On/off switch, without electrical
isolation
Operating Instructions, 01/2021, A5E43920357-AA
Symbol Meaning
Lock is closed
Lock is open
Opening for Kensington lock
Warning of hot surface
Symbol Meaning
C
189