Peg Port Configuration - IEI Technology SPCIE-C246 User Manual

SPCIE-C246 Full-size PICMG 1.3 CPU Card
Primary IGFX Boot Display [VBIOS Default]

Use the Primary IGFX Boot Display option to select the display device used by the
system when it boots. Configuration options are listed below.
VBIOS Default

CRT

HDMI


5.4.1.3 PEG Port Configuration

Aptio Setup Utility – Copyright (C) 2018 American Megatrends, Inc.
PEG Port Configuration
PEG Link Width Configuration
PEG 0:1:0
Enable Root Port
Max Link Speed
Version 2.20.1271. Copyright (C) 2018 American Megatrends, Inc.
BIOS Menu 25: PEG Port Configuration
PEG Link Width Configuration [1 x16]

Use the PEG Link Width Configuration option to configure the PCIe x16 channel mode
on the backplane.

1 x16

2 x8

1 x8, 2 x4
Default
Chipset
[1 x16]
Not Present
[Enabled]
[Auto]
D Sets the PCIe x16 link width as one PCIe x16 slot
EFAULT
Sets the PCIe x16 link width as two PCIe x8 slots
Sets the PCIe x16 link width as one PCIe x8 and two
PCIe x4 slots
Select PEG Port Link Width
as x16 or 2x8 or 1x8 & 2x4
configuration.
----------------------
: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Page 93