Table of Contents
Advertisement
SPCIE-C246 Full-size PICMG 1.3 CPU Card
5.1 Introduction
The BIOS is programmed onto the BIOS chip. The BIOS setup program allows changes to
certain system settings. This chapter outlines the options that can be changed.
NOTE:
Some of the BIOS options may vary throughout the life cycle of the
product and are subject to change without prior notice.
5.1.1 Starting Setup
The UEFI BIOS is activated when the computer is turned on. The setup program can be
activated in one of two ways.
1. Press the DEL or F2 key as soon as the system is turned on or
2. Press the DEL or F2 key when the "Press DEL or F2 to enter SETUP"
message appears on the screen.
If the message disappears before the DEL or F2 key is pressed, restart the computer and
try again.
5.1.2 Using Setup
Use the arrow keys to highlight items, press E
PageDown keys to change entries, press F1 for help and press E
keys are shown in the following table.
Key
Up arrow
Down arrow
Left arrow
Right arrow
+
-
Page Up
Page Dn
Function
Move to previous item
Move to next item
Move to the item on the left hand side
Move to the item on the right hand side
Increase the numeric value or make changes
Decrease the numeric value or make changes
Move to the previous page
Move to the next page
to select, use the PageUp and
NTER
to quit. Navigation
SC
Page 63
Advertisement
Table of Contents
