Sata Configuration - IEI Technology SPCIE-C246 User Manual

SPCIE-C246 Full-size PICMG 1.3 CPU Card

5.4.2.2 SATA Configuration

Use the SATA Configuration menu (BIOS Menu 29) to change and/or set the
configuration of the SATA devices installed in the system.
Aptio Setup Utility – Copyright (C) 2018 American Megatrends, Inc.
SATA And RST Configuration
SATA Controller(s)
SATA Mode Selection
PCIe Storage Dev On Port 21
SATA PORT 1
Hot Plug
SATA PORT 2
Hot Plug
SATA PORT 3
Hot Plug
SATA PORT 4
Hot Plug
SATA PORT 5
Hot Plug
SATA PORT 6
Hot Plug
Version 2.20.1271. Copyright (C) 2018 American Megatrends, Inc.
BIOS Menu 29: SATA Configuration
SATA Controller(s) [Enabled]

Use the SATA Controller(s) option to configure the SATA controller(s).

Enabled

Disabled
Chipset
[Enabled]
[AHCI]
[Not RST Controlled]
Empty
[Disabled]
Empty
[Disabled]
Empty
[Disabled]
Empty
[Disabled]
Empty
[Disabled]
Empty
[Disabled]
D Enables the on-board SATA controller(s).
EFAULT
Disables the on-board SATA controller(s).
Enable/Disable SATA
Device.
---------------------
: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Page 99