Table of Contents
Advertisement
SPCIE-C246 Full-size PICMG 1.3 CPU Card
Step 7:
Insert the CPU. Gently insert the CPU into the socket. If the CPU pins are
properly aligned, the CPU should slide into the CPU socket smoothly. See
Figure 4-3.
Figure 4-3: Insert the Socket LGA1151 CPU
Step 8:
Close the CPU socket. Close the load plate and pull the load lever back a little
to have the load plate be able to secure to the knob. Engage the load lever by
pushing it back to its original position (Figure 4-4). There will be some
resistance, but will not require extreme pressure.
Figure 4-4: Close the Socket LGA1151
Page 49
Advertisement
Table of Contents
