Chassis Intrusion Connector; Figure 3-4: Battery Connector Location; Figure 3-5: Chassis Intrusion Connector Location; Table 3-5: Battery Connector Pinouts - IEI Technology SPCIE-C246 User Manual

Figure 3-4: Battery Connector Location

Pin Description
1 VBATT
2 GND

Table 3-5: Battery Connector Pinouts

3.2.4 Chassis Intrusion Connector

CN Label: CHASSIS1
CN Type: 2-pin header, p=2.54 mm
CN Location: See Figure 3-5
See Table 3-6
CN Pinouts:
The chassis intrusion connector is for a chassis intrusion detection sensor or switch that
detects if a chassis component is removed or replaced.

Figure 3-5: Chassis Intrusion Connector Location

Pin Description
1 +3.3VSB
2 CHASSIS OPEN

Table 3-6: Chassis Intrusion Connector Pinouts

Page 20
SPCIE-C246 Full-size PICMG 1.3 CPU Card