Table of Contents
Advertisement
SPCIE-C246 Full-size PICMG 1.3 CPU Card
5.6 Boot
Use the Boot menu (BIOS Menu 32) to configure system boot options.
Aptio Setup Utility – Copyright (C) 2018 American Megatrends, Inc.
Main
Advanced
Boot Configuration
Bootup NumLock State
Quiet Boot
UEFI Boot
Launch PXE OpROM
Option ROM Messages
Boot Option Priorities
Version 2.20.1271. Copyright (C) 2018 American Megatrends, Inc.
BIOS Menu 32: Boot
Bootup NumLock State [On]
Use the Bootup NumLock State BIOS option to specify if the number lock setting must
be modified during boot up.
On
Off
Chipset
Security
[On]
[Enabled]
[Disabled]
[Disabled]
[Force BIOS]
D
Allows the Number Lock on the keyboard to be
EFAULT
enabled automatically when the computer system
boots up. This allows the immediate use of the
10-key numeric keypad located on the right side of
the keyboard. To confirm this, the Number Lock LED
light on the keyboard is lit.
Does not enable the keyboard Number Lock
automatically. To use the 10-keys on the keyboard,
press the Number Lock key located on the upper
left-hand corner of the 10-key pad. The Number
Lock LED on the keyboard lights up when the
Number Lock is engaged.
Boot
Save & Exit
Select the keyboard
NumLock state
---------------------
: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1:
General Help
F2:
Previous Values
F3:
Optimized Defaults
F4:
Save & Exit
ESC: Exit
Page 103
Advertisement
Table of Contents
