Switch Administration
By default, all ports on the SmartCell 6A000 are set for liberal Call Admission Control. Use the
command to view the current CAC policies used by each port.
SmartCell ZX# show cacparams
PortNumber(ALL)
Port#
Allocation Scheme
============================================================================
A1
LIBERAL
A2
LIBERAL
A3
LIBERAL
A4
LIBERAL
B1
LIBERAL
B2
LIBERAL
B3
LIBERAL
B4(CPU)
LIBERAL
C1
LIBERAL
C2
LIBERAL
C3
LIBERAL
C4
LIBERAL
D1
LIBERAL
D2
LIBERAL
D3
LIBERAL
D4
LIBERAL
SmartCell ZX#
If there are a large number of connections on a particular port, and these connections begin to slow down and show
signs of congestion, use the
SmartCell ZX # set cacparams
PortNumber(ALL)
AllocScheme(LIBERAL)
SmartCell ZX #
4.6.3
Class of Service Queues
The SmartCell 6A000 performs buffering using a shared-memory architecture. Buffer space is divided into queues for
each class of service (QoS). In turn, ports are allocated some portion of each of the QoS queues. This allocation is
controlled on a per-port basis by the
:
command to change the CAC policy to moderate or conservative.
set cacparams
: b2
: conservative
porttrafficcongestion
commands.
SmartCell 6A000 User Guide 4-21
Traffic Management
show cacparams
Need help?
Do you have a question about the SmartCell 6A000 and is the answer not in the manual?