Point-To-Multipoint Pvcs - Cabletron Systems SmartCell 6A000 User Manual

Switch Administration
Use to associate the end node's IP address with the PVC.
3.
add ipatmpvc
SmartCell ZX # add ipatmpvc
ClientNumber(0)
DestinationIP()
DestinationVPI(0)
DestinationVCI(33)
SmartCell ZX #
4. Connect the end node to port A1 of the SmartCell 6A000.
5. Configure the end node with IP address 10.1.1.22, subnet mask 255.0.0.0, and VPI/VCI pair = 0/100.
4.5.2

Point-to-Multipoint PVCs

Instructions in this section describe how to set up a point-to-multipoint connection through your SmartCell 6A000.
Example: Create a point-to-multipoint connection between a broadcasting workstation on port A1 and three other
workstations connected to ports B2, B3, and C1.
Use
1.
add trafficdescriptor
assures that traffic on the PVC is one way only.
SmartCell ZX # add trafficdescriptor
TrafficType(UBR)
TrafficDescriptorType(8)
PCRCLP01(0)
PCRCLP0(0)
SCRCLP01(0)
SCRCLP0(0)
MBSCLP01(0)
MBSCLP0(0)
QOSClass(1)
AALType(5)
SmartCell ZX #
2. Use
show trafficdescriptor
SmartCell ZX # show trafficdescriptor
TD# Traff Desc QoS
Type Type
============================================================================
1 UBR 8 4
2 NRTVBR 2 1
3 UBR 8 1
4 UBR 8 1
4155 UBR 8 0
4158 UBR 8 0
4162 UBR 8 0
4180 UBR 8 0
SmartCell ZX #
In the example above, traffic descriptor # 4 (left column) has AALType 0 (
: 2 <specify local client number
: 10.1.1.22 <end node's IP address
:
: 100 <VCI was specified as 100
to create a backward traffic descriptor with AAL Type = null. This
:
:
:
:
:
:
:
:
:
: 0 <set AAL Type = null.
to obtain the new traffic descriptor index number.
Peak Cell Rate Sust Cell Rate
(Kb/s) (Kb/s)
CLP_0 CLP_0+1 CLP_0
0 34 0
0 1372 0
0 0 0
0 0 0
0 138889 0
0 353 0
0 353 0
0 353 0
Max Burst Size
(Kb)
CLP_0+1 CLP_0 CLP_0+1
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
).
null
Setting Up PVC Connections
Aal VC
Type Type
0 5 PVC
0 5 PVC
0 5 PVC
0 0 PVC
0 5 SVC
0 5 SVC
0 5 SVC
0 5 SVC
SmartCell 6A000 User Guide 4-15