Logs And Alarms; Ip Routing Through Sw1 For Connectivity To The Ethernet Network - Cabletron Systems SmartCell 6A000 User Manual

Switch Administration
To see the route, enter the
SmartCell ZX # show route
ROUTE NET TABLE
destination gateway
------------------------------------------------------------------------
0.0.0.0 0.0.0.0
90.1.1.0 90.1.1.33
128.205.99.0 90.1.1.254
------------------------------------------------------------------------
ROUTE HOST TABLE
destination gateway
------------------------------------------------------------------------
127.0.0.1 127.0.0.1
------------------------------------------------------------------------
SmartCell ZX #
ELAN
Switch client
on SW1,
90.1.1.254
Figure 4-3 IP routing through SW1 for connectivity to the Ethernet network
4.4

LOGS AND ALARMS

This section discusses the log and alarm features, concepts, and the commands provided by the SmartCell 6A000
switch for setting and using the log and alarm options.
command on SW2
show route
flags Refcnt
1 0
1 0
1 3
flags Refcnt
5 0
SW2
SW1
Ethernet interface
128.205.99.254
Ethernet network 128.205.99.0
Use Interface
0 zn0
1688 zn1
5660 zn1
Use Interface
0 lo0
Switch client
on SW2, 90.1.1.33
Switch client on SW1 is
defined as SW2's
gateway to the Ethernet
Logs and Alarms
NMS
SmartCell 6A000 User Guide 4-11