Fujitsu PRIMERGY RX2450 M1 Upgrade And Maintenance Manual page 90

Hard disk drive (HDD) / solid state disk (SSD)
Figure 55: Installing the 2.5-inch HDD/SSD module
▶ Insert the HDD/SSD module into a drive bay and carefully push back as far
as it will go.
Figure 56: Closing the locking lever
▶ Close the locking lever to lock the HDD/SSD module in place.
▶ When using a RAID array, add the additional HDD/SSD to the RAID array.
Configuring the RAID array, see the documentation of the RAID
controller, used in your configuration, see
page 22.
90 Upgrade and Maintenance Manual
"Documentation overview" on
RX2450 M1