Fujitsu PRIMERGY RX2450 M1 Upgrade And Maintenance Manual page 121

Configuration with two RAID controllers
SAS#2
SAS#3
SAS#4
SAS#5
Figure 86: Routing cables 4x CBL-SAST-0531 (A)
Figure 87: Routing cables 4x CBL-SAST-0531 (B)
▶ Connect two cables to the connectors "SAS#2" and "SAS#3" on the HDD
backplane and to the connectors "C0" and "C1" on the first RAID controller.
▶ Connect two cables to the connectors "SAS#4" and "SAS#5" on the HDD
backplane and to the connectors "C0" and "C1" on the second RAID
controller.
▶ Thread the cables through the fan bracket.
RX2450 M1 Upgrade and Maintenance Manual
Expansion cards and riser cards
121