Expansion cards and riser cards
Figure 77: Installing the PDUAL CP100 in the riser module 2
▶ Install the PDUAL CP100 in slot 6.
▶ Fasten the PDUAL CP100 with one screw (see circle).
One screw is left over and can be discarded.
Concluding steps
▶ Install the riser module 2, see
▶
"Reassembling" on page
▶ Connect all external cables to the expansion card(s).
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
114
"Installing the riser module 2" on page
44.
48.
49.
Upgrade and Maintenance Manual
57.
RX2450 M1