Fujitsu PRIMERGY RX2450 M1 Upgrade And Maintenance Manual page 175

Installing the CPU
Figure 138: Installing the CPU
▶ Install the CPU in the CPU carrier bracket (1).
Ensure that the CPU fits into the guides of the CPU carrier bracket.
CAUTION
CPUs are extremely sensitive to electrostatic discharge and therefore
must always be handled with care.
▶
After a CPU has been removed from its protective sleeve or from its
socket, place it upside down on a nonconducting, antistatic surface.
▶
Never push a CPU over a surface.
▶ Lift the CPU socket cover up and away from the socket (2).
To remove the CPU socket cover, place your thumb against the front
edge of the protective socket cover and rest your index finger on the
rear grip.
RX2450 M1 Upgrade and Maintenance Manual
Processor (CPU)
175