Table of Contents
Advertisement
Figure 141: Fastening the screws
▶ Fasten the three screws of the CPU carrier bracket e in the order from 1 to
3.
Applying the thermal paste to the heat sink surface
For Japan, the service engineer must follow the instruction provided
separately.
If the CPU upgrade or replacement kit contains a new heat sink, a thin
layer of thermal compound has already been pre-applied to its lower
surface. In this case, it isn't necessary to apply thermal paste to the heat
sink lower surface.
Figure 142: Thermal paste syringe
RX2450 M1
Upgrade and Maintenance Manual
Processor (CPU)
177
Advertisement
Table of Contents
