Table of Contents
Advertisement
Expansion cards and riser cards
Figure 93: Removing the slot covers
▶ Remove the screws (see circles) and remove the slot covers.
CAUTION
▶
Keep the slot cover for future use.
▶
If the expansion card is removed and not replaced with a new
one, the slot cover must be reinstalled due to cooling, to comply
with applicable EMC regulations and to protect against fire.
Figure 94: Loosening the two screws from the riser module 1
▶ Loosen the two screws on the top side of the riser module 1 (see circles).
126
Upgrade and Maintenance Manual
RX2450 M1
Advertisement
Table of Contents
