Fujitsu PRIMERGY RX2450 M1 Upgrade And Maintenance Manual page 81

Tools: tool-less
CAUTION
▶
When replacing a PSU in a non-redundant PSU configuration, the
server must be switched off first.
▶
Replace the PSU after specifying the one that breaks down at work
by revitalization.
Preliminary steps
▶
"Locating the defective server" on page
▶ Check which PSU is defective.
A PSU is defective when the PSU status indicator lights orange. For more
information, see
▶ Only when replacing a PSU in a non-redundant configuration:
down the server" on page
▶ Remove the power cord from the defective PSU, see
power cord (AC PSU)" on page
Removing the defective hot-plug PSU
▶ Remove the PSU, see
Installing the new hot-plug PSU
▶ Install the PSU, see
Concluding steps
▶ Connect the power cord to the new PSU,
on page 48.
▶ Only when replacing a PSU in a non-redundant configuration:
the server" on page
RX2450 M1
"Indicator on hot-plug PSU" on page
37.
38.
"Removing a hot-plug PSU" on page
"Installing a hot-plug PSU" on page
49.
Upgrade and Maintenance Manual
Power supply unit (PSU)
37.
212.
"Disconnecting the
76.
see"Connecting the power cord"
"Shutting
79.
"Switching on
81