Table of Contents
Advertisement
Figure 21: Routing the GPU power cable
▶ Route the GPU power cable as shown.
CAUTION
▶
Ensure that the GPU is fixed well without any tilting issue.
Figure 22: Inserting the riser module 1
▶ Insert the riser module 1.
CAUTION
▶
Ensure that the riser card is securely plugged in the PCIe slot on
the system board, and there should not be any significant tilting and
gap in the area.
RX2450 M1
Upgrade and Maintenance Manual
Basic hardware procedures
55
Advertisement
Table of Contents
