Replacing An Expansion Card From Riser Module 2 - Fujitsu PRIMERGY RX2450 M1 Upgrade And Maintenance Manual

Expansion cards and riser cards
Figure 79: Installing the slot cover - example slot 2
▶ Install the slot cover.
▶ Fasten the screw (see circle).
Concluding steps
▶ Install the riser module 2, see
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
9.3.6

Replacing an expansion card from riser module 2

Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver
Preliminary steps
▶
"Locating the defective server" on page
▶
"Shutting down the server" on page
116
"Installing the riser module 2" on page
44.
48.
49.
37.
Upgrade and Maintenance Manual
Hardware: 15 minutes
37.
57.
RX2450 M1