Figure 101: Fastening the two screws to the riser module 1
▶ Fasten the two screws on the top side of the riser module 1 (see circles).
Figure 102: Installing the slot covers
▶ Install the slot covers and fasten the screws (see circles).
Concluding steps
▶ Install the riser module 1, see
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
RX2450 M1
"Installing the riser module 1" on page
44.
48.
49.
Upgrade and Maintenance Manual
Expansion cards and riser cards
54.
131