Trap Configuration; Alarm Configuration - Cabletron Systems 1082 User Manual

C o n f i g u r a t i o n V i e w s

Trap Configuration

This area of the Repeater Configuration view
allows you to enable or disable the following
traps.
Link Traps
Allows all packets indicating a change in link
status to be reported within the trap database.
Possible menu selections are: Disable, Enable,
and other.
Segmentation Traps
Allows all packets indicating a change in
segmentation status to be reported within the
trap database. Possible menu selections are:
Disable, Enable, and other.

Alarm Configuration

This area of the Repeater Configuration view
provides configuration information on generating
alarms for the selected module. This area
contains the fields described below.
Timebase
Displays the user defined time interval, in
seconds, for the Traffic Threshold. The lowest
allowable value is 10.
S p e c t r u m E n t e r p r i s e M a n a g e r
Traffic Alarms
Allows you to enable or disable detection of Traffic
Alarms.
Traffic Threshold
Displays the threshold value for the number of
packets that can be transmitted during the
Timebase before generating a traffic alarm. This
field is user-configurable from 1 to 4 billion.
Collision Alarms
Allows you to enable or disable detection of
Collision Alarms.
Collision Threshold
Displays the threshold value within the alarm
timebase which, once that number of collisions
per good packet is exceeded, generates a collision
alarm. This value is user-configurable. Allowable
range is 1 to 15 collisions per good packet.
Broadcast Alarms
Allows you to enable or disable detection of
Broadcast Alarms.
Broadcast Threshold
Displays the threshold value within the alarm
timebase which, once that number of broadcasts
received is exceeded, generates a broadcast
alarm. This value is user-configurable. Allowable
range is 1 to ~4 billion.
Page 57
R e p e a t e r C o n f i g u r a t i o n V i e w
S m a r t S w i t c h 6 0 0 0