Module Identification Labels; Backplane Connections Labels; Chassis Information - Cabletron Systems 1082 User Manual

D e v i c e V i e w s

Module Identification Labels

These labels provide the following information
that identifies a specific device.
Slot Number
The module's location in the chassis. Double-click
this area to open the Application view described
under Applications View (page
Model Type
The type of module in the chassis (for example
6E132-25). Double-click this area to open the
Model Information view.
For more information on the Model Information
view, refer to the SPECTRUM Views
documentation.
Model Name
A user-defined name; otherwise, it defaults to the
IP address. Double-click this area to open the
Device Configuration View (page

Backplane Connections Labels

These labels represent the interfaces between the
module and the FTM backplane. The device-
specific Icon Subviews menu selection for these
labels is Configuration, which opens a dialog box
that lets you enable or disable the selected port.
Note in Figure 15 that the Backplane Module icon
S p e c t r u m E n t e r p r i s e M a n a g e r
38).
47).
Page 35
B a c k p l a n e M o d u l e I c o n S u b v i e w s
has a gray Backplane Connection label (b4),
which corresponds with interface four of the
chassis backplane.
Table 15 describes the possible operational states
of the backplane connections.
Table 15: Backplane Connection Status
Descriptions
Color Status
Green ON Operational
Yellow NLK Operational but not linked
Magenta Test Operational test
Blue Off Operationally and administratively
down
Red Off Operationally down but
administratively enabled
Gray UNK Unknown

Chassis Information

The Chassis Information panel within the
Backplane Device view provides the same
information as a similar panel in the Chassis
Device view described under
(page 29).
Description
Chassis Information
S m a r t S w i t c h 6 0 0 0