Advertised Ability; Received Technology - Cabletron Systems 1082 User Manual

C o n f i g u r a t i o n V i e w s
Advertised Ability selections. You can only select
one Operational Mode.
current modes, their values, and descriptions.
Table 22: Operational Mode Values
Operational Mode Value
Auto Negotiation 2
10Base-T 8
10Base-TFD 16
100Base-TX 32
100Base-TXFD 64
100Base-T4 128
100Base-FX 256
100Base-FXFD 512

Advertised Ability

This panel, in the Fast Ethernet Configuration
view, shows the advertised ability of the local
hardware, which only becomes active on ports
that have Auto-Negotiation enabled. Auto-
negotiation allows the FE-100TX RJ45 port to
self-configure to 10 or 100 Mbps depending on
the speed of the attached module. The interfaces
S p e c t r u m E n t e r p r i s e M a n a g e r
Table 22 shows the
Description
Auto Negotiation/Parallel
Detect.
10Base-T
Full duplex 10Base-T
100Base-TX
Full duplex 100Base-TX
100Base-T4
100Base-FX
Full Duplex 100Base-FX
F a s t E t h e r n e t C o n f i g u r a t i o n V i e w
can also dynamically configure themselves for
Full Duplex or Half Duplex (standard mode)
operation when both ends of the link support
auto-negotiation. When only one link partner
supports auto-negotiation, the mode defaults to
half duplex. Table 23
modes, their values, and descriptions.
Table 23: Advertised Ability Values
Advertised
Ability
10Base-T
10Base-TFD
100Base-TX
100Base-TXFD
100Base-T4
100Base-FX
100Base-FXFD

Received Technology

This panel, in the Fast Ethernet Configuration
view, shows the received technology of the remote
hardware, or link partner.
received technology modes, their values, and
descriptions. These modes are read only.
Page 55
lists the advertised ability
Value Description
8 10Base-T
16 Full Duplex 10Base-T
32 100Base-TX
64 Full Duplex 100Base-TX
128 100Base-T4
256 100Base-FX
512 Full Duplex 100Base-FX
Table 24 lists the
S m a r t S w i t c h 6 0 0 0