Table of Contents
Advertisement
Installation
Splitwood Kit 1700SWK
Material required
• Split Wood Kit, which contains:
• 1 bag of splinters
• 1 bag of small embers
• 11 logs
Installation
Carefully unpack the kit.
Logs, embers & splinters
Some logs are marked with a number to facilitate
their identifi cation. They also have positioning pins
underneath which fi t into the SQUARE holes in the
media tray.
Square hole—use
the square holes
Some logs straddle the burner; make sure they rest
over the smaller burner ports rather than the larger
ones.
Large ports.
Do not place logs on Large ports.
44
1. Install the logs according to the images below. See
image of full layout of logs in the following pages.
Use the following order: log 1, 2, 3, 4, 6, 5, 7, 9, 8, 10
and 11.
Notes
• Log 1 rests on the media tray.
• Log 2 rests on notch of log 1.
• Log 3 rests across the front corner of the burner.
Log 3 detail
Fuel Beds
1
2
Advertisement
Table of Contents
