Standoffs & Adapter - Valor LX2 2200KN Installation Manual

Preparation
Fit Standoff s
The standoff s are supplied fl at. Bend them as shown
and fi x them to the top of the fi rebox.
Note: If installing with an all
steel framing, the top standoff s
are not necessary. Ensure that
the framing is self-supporting,
that is it NOT supported by the
engine.
Fit 6-5/8" x 4" Vent Adapter (if required)
This unit is supplied with a 5" x 8" vent outlet which
can be fi eld-converted to a 4" x 6-5/8" vent outlet by
installing the vent adapter supplied with the appliance.
Fit HeatShift Take-off Collars (required)
Install HeatShift take-off collars to appliance using
screws provided with appliance. See HeatShift
installation information in Appendix for details.
Fold fl at
standoff s
Standoffs & Adapter
LX2
27