How To Configure And Test The Can Converters - ICP DAS USA I-7530 User Manual

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru

3.1 How to configure and test the CAN converters

Configuration Interface:
 Step 1. Before powering on the CAN converters, users must set them
to the Init mode. Users need to switch the Init/Normal DIP-
Switch to Init position described in the section 2.5.1.
Afterwards, power on the CAN converter and the Run LED
indicator will be flashed once per second.
 Step 2. Connect the available COM port of the PC to the CAN
converters, and execute the VxCAN Utility.
 Step 3. Click the button
the PC.
 Step 4. After finishing the search, the CAN converters (for example
tM-7530 and I-7530) which are connecting to the PC or have
connected to the PC will be list in the left side of the VxCAN
Utility. If the tM-7530 is in Init mode, the VxCAN utility shows
the "Init" information in the list.
I-7530, I-7530-FT, I-7530A, I-7565 User's Manual (Version 1.3, Apr/2015) -------- 21
to search all CAN devices connected to