ICP DAS USA I-7530 User Manual page 30

The uart to can bus converter

Hide thumbs Also See for I-7530:

Table of Contents

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ

+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru

 Step 5. Click the CAN port of the CAN converter to set the CAN

parameters of the CAN converter.

Check the "Active Port" and Click "Confirm" button to enable the CAN

port of the CAN converter. The parameters set here are not stored in the

EEPROM. If users would like to configure the other parameters expect the

CAN parameters, please use Configuration interface of the VxCAN Utility

to do that.

 Step 6. Click "Start" button

The test interface is divided to two areas. One is for sending CAN

messages, and the other is for reception. If users want to send CAN

I-7530, I-7530-FT, I-7530A, I-7565 User's Manual (Version 1.3, Apr/2015) -------- 30

to open test interface.

Send Area

Received Area

Table of Contents

I-7530t I-7530-ft I-7530a Tm-7530 I-7565