ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
Status
JP4 position
Enable (default)
(Activate)
Disable
(Deactivate)
There is no terminator resistor in the tM-7530. Therefore, if users
would like to use terminator resistor, it is necessary to wire a 120Ω
resistance on the CAN bus, as following figure.
I-7530, I-7530-FT, I-7530A, I-7565 User's Manual (Version 1.3, Apr/2015) -------- 16