ICP DAS USA I-7530 User Manual page 67

The uart to can bus converter

Hide thumbs Also See for I-7530:

Table of Contents

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ

bytes data.).

Application 3:

This application may be used to construct a RS-232 device network

via CAN bus. The architecture is shown below.

Configurations:

In order to apply this application, user need to configure the three

CAN Converter modules #1, #2 and #3, like I-7530 as above figure. The

RS-232 configurations of these three CAN Converter modules are

decided by the RS-232 device they connect with.

module #1 Configuration

I-7530, I-7530-FT, I-7530A, I-7565 User's Manual (Version 1.3, Apr/2015) -------- 67

+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru

module #2 Configuration

module #3 Configuration

Table of Contents

I-7530t I-7530-ft I-7530a Tm-7530 I-7565